Installation/Ubuntu/Focal

Introduction

Note:

You don't need to have your own pod to use diaspora*.
Running your own diaspora* server allows more control over your data, but it requires technical skills and time. Instead, you can register on one of the installations open to everyone that allow you to use diaspora* in a few clicks without any requirements

This guide will outline the procedure to get you set up with a development-ready installation of diaspora*.

Things to know

The install is a bit complex, but we're here to help.
It's extremely helpful to have some experience in Linux/Unix server administration or Rails app deployment already. But don't worry, if you run into problems and need help, just visit us in our IRC channels on Freenode.
Running a common setup will get you the most help, if you need it.
Most people in the community will have some experience running diaspora* with Unicorn as the app server using Nginx as outward-facing web server. Of course, you're free to run any other app server (Thin, Passenger...) or web server (Apache), but you might find it harder to get help if you run into unexpected troubles.
diaspora* is developed utilizing latest web standards
Therefore UX is best with recent browsers, so please update your Firefox, Opera, Chrome or Safari to the newest version. We do not currently support any version of Internet Explorer, though we won't reject any contributions attempting to change that circumstance.
diaspora* strongly recommends HTTPS
as we encrypt communication amongst servers and to the client browsers. You can get a free TLS certificate from Let's Encrypt.
Unfortunately, self-signed certificates or certificates issued by CACert won't work.
We need your feedback
to constantly improve and update this guide. Have a look at How we communicate
Do not run any of the commands you find in this guide as root (except if requested).
Just use your normal user - or even better - create a separate user for diaspora* (rationale).

Requirements

Hardware

Minimum recommended:

Memory: 1.5 GB
Swap: 1 GB
CPU: decent multicore
Storage: The amount of hard disk space required largely depends on how many images you expect your users to upload.

It is possible to run a pod on a Raspberry Pi >= 2. However, this will be very slow and is not recommended for multi-user pods.

Software

Over the course of this manual, you will install the following software if not already installed.

Build tools - for compiling source packages
Ruby - the Ruby programming language
RubyGems - package manager for Ruby code libraries (like CPAN for Perl or PEAR for PHP)
Bundler - gem management tool for Ruby projects
MySQL or MariaDB or PostgreSQL - backend storage engine
OpenSSL - encryption library.
libcurl - multiprotocol file transfer library WARNING: Due to sidekiq longjmp error, you need at least curl 7.32
ImageMagick - image processing library
Git - version control system
Redis - persistent key-value store
one of the JavaScript runtimes on execjs' supported list.

Please note that running diaspora* together with other applications that use Redis on the same machine can be dangerous. Only do that if you absolutely know what you are doing, and if you know how to change the Redis database for all of the applications.

Versions of this guide

Warning:

Make sure to use the correct version of the guide, see below.

» Help me decide!

In Production mode, your pod is configured to deal with high load for everyday usage. This is recommended for a pod you want to actually use.

In Development mode, your pod is configured for development. This is recommended ony for development contributors of diaspora* which use the pod only locally for testing purposes.

For Database, choose PostgreSQL unless you already have an existing database server that you want to re-use. We recommend an isolated PostgreSQL installation exclusively for your pod.

The current guide is for a development setup with PostgreSQL as database.

You can change them below:

Running mode: Production | Development

Database: PostgreSQL | MySQL (deprecated) | MariaDB (deprecated)

Prepare the system

Install packages

Run:

sudo apt-get update
sudo apt-get install build-essential git curl gsfonts imagemagick libmagickwand-dev nodejs redis-server libssl-dev libcurl4-openssl-dev libxml2-dev libxslt1-dev libidn11-dev yarnpkg libidn11-dev libpq-dev cmake

Install the database

Skip this step if you already have one.

See the Ubuntu server guide.

Removing packaged version of RVM

If you installed RVM via the package manager, we recommend to remove it. See this StackOverflow answer for some tips on how to do that and then continue with the installation instructions below.

Creating a user for DB

If you like a separate DB user for your diaspora* installation, log in to your PostgreSQL server as the main user 'postgres'. One way to do this is:

sudo -u postgres psql

You need a user with the privilege to create databases.

CREATE USER diaspora WITH CREATEDB PASSWORD '<password>';

RVM

We recommend using Ruby Version Manager it will ensure you're always on the currently recommended Ruby version and cleanly separate your diaspora* installation from all other Ruby applications on your machine. If you opt for not using it ensure your Ruby version is at least 2.6.0, prior versions are incompatible. We currently recommend using the latest release of the 3.3 series.

Install RVM

As the user you want to run diaspora* under, that is not as root, run:

curl -L https://s.diaspora.software/1t | bash

and follow the instructions. If you get GPG signature problems, follow the instructions printed by the command. Running the 'gpg --recv-keys' command with 'sudo' should not be necessary. If those commands give you permission denied errors, change them to 600 for all files and 700 for all folders in the .gnupg folder.

Set up RVM

Ensure the following line is in your ~/.bashrc:

[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm"

Now run source ~/.bashrc in the terminal(s) you are using for this guide.

If you don't have sudo installed or your current user doesn't have the privileges to execute it, run:

rvm autolibs read-fail

The next command will check if all dependencies to build Ruby are installed. If these are not met, you will see a list of packages preceded by "Missing required packages:". As root install all the packages listed there for your OS. Then rerun the install command.

Ensure the currently recommend version of Ruby is installed:

rvm install 3.3

Get the source

It's time to download diaspora*! As your diaspora user run:

cd ~
git clone  https://github.com/diaspora/diaspora.git
cd diaspora

Don't miss the cd diaspora, all coming commands expect to be run from that directory!

Configuration

Copy files

cp config/database.yml.example config/database.yml
cp config/diaspora.toml.example config/diaspora.toml

Bundle

It's time to install the Ruby libraries required by diaspora*:

script/configure_bundler
bin/bundle install --full-index

This takes quite a while. When it's finished, you should see a message similar to: Bundle complete! 137 Gemfile dependencies, 259 gems now installed. If that's not the case, you should seek for help on the mailing list or the IRC channel.

Running the manual gem install command shown in the error message can sometimes show a clearer error message if the bundle command fails.

Database setup

Double check your config/database.yml looks right and run:

bin/rake db:create db:migrate

Start diaspora*

It's time to start diaspora*:

./script/server

Your diaspora server is now running, either on a unix socket (current default) or on http port 3000. The listening method can be configured in diaspora.toml, search for '3000' or 'listen' to find the correct line.

Backup